D
Setting digital code
for digital code squelch
or beep
q Push [MAIN/DUAL] to select B band, then push and hold
[MODE](REC) for 1 sec. several times to select DV mode.
w Enter “DIGITAL CODE” in DV SET MODE.
(p. 92)
e Rotate [DIAL]
†
to select the desired digital code.
• Each operating band and each memory channel have inde-
pendent settings.
r Push [ ](5) (or [ ](4)) to return to DV SET MODE, and
push [MENU/
] to return to frequency indication.
D Setting the YOUR and MY call signs for
digital call sign squelch or beep
q Push [MAIN/DUAL] to select B band, then push and hold
[MODE](REC) for 1 sec. several times to select DV mode.
w Enter “YOUR CALL SIGN” in CALL SIGN set mode.
(p. 36)
e Rotate [DIAL]
†
to select the desired call sign.
• Input the call sign if the desired call sign is not stored in the
transceiver. See p. 36 for detail.
r Push [ ](5) (or [ ](4)) to return to CALL SIGN set mode.
Continue to the next page.
■ Digital code and digital call sign setting
❮MENU screen❯ ➪ ❮DV SET MODE❯ ➪ ❮DIGITAL CODE❯
(Push [MENU/
]) (Rotate [DIAL]
†
, then push [ ](5)
†
.)
❮MENU screen❯ ➪ ❮CALL SIGN❯ ➪ ❮YOUR CALL SIGN❯
(Push [MENU/
]) (Rotate [DIAL]
†
, then push [ ](5)
†
.)
To Next Page
Loading...
