7
• When “SELECT” is set to “EDIT RECORD” item
r Push [ ](6) to select the call sign programming mode.
• The 1st digit of the selected call sign blinks.
t Edit or modify the selected call sign as described in “D
Station call sign programming”
(p. 36) or “D Repeater call
sign programming”
(p. 41).
y Push [
](5).
• Call sign channel number blinks.
u Rotate [DIAL]
†
to select the desired call sign channel to
store.
i Push [
](5) to store the edited/modifi ed call sign into the
selected channel.
†
[DIAL] ↔ [ ](2)/[ ](8) [ ](5) ↔ [ ](6)
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
To Next Page
Loading...
