i
Thank you for choosing this Icom product.
The IC-PW2 is an HF/50 MHz all band linear
continuous transmission.
years of trouble-free operation.
READ ALL INSTRUCTIONS carefully and completely
SAVE THIS INSTRUCTION MANUAL— This
instruction manual contains important operating
instructions for the IC-PW2.
z 1 kW full power and full duty cycle operation
z A high-eciency power supply unit
z Detachable controller with a 4.3 inch touch
screen color display
z A relay-type automatic antenna tuner that
covers the same matching range from the HF
band to the 50 MHz band
z An auto antenna selector that can switch
between 6 antennas in synchronization with the
frequency band of 2 exciters
z Connectors for external units, such as a
preamplier and a band-pass lter
z Supports simultaneous output of band signal
on 2 systems
z The Display function during protection operation
z Operation with exciters of up to 200 W output
power
z Supports the Single Operator Two Radios
(SO2R) operation
z Transmitter Lockout function to prevent
simultaneous transmission from 2 exciters
z An SD card slot for saving settings and
updating rmware
z REMOTE AUX jack used for antenna control,
and so on
z The Digital Pre-Distortion (DPD) function for
increased linearity and clean transmission
z A LAN port for remote control operation from a
PC
(Future function, as of June 2024)
L Information
•
•
•
•
3
Controller
Controller cable
3
Mounting bracket standGrounding lug
To Next Page
Loading...
