OTHER FUNCTIONS
8
8
8-2
Clock and timers
D Setting the date
1. Display the DATE/TIME screen.
»
SET > Time Set > Date/Time
2. Touch “Date.”
• Displays the date editing screen.
3. Touch [+] or [–] to set the date.
4. Touch [SET] to set the date.
• Returns to the previous screen.
L To cancel the editing, touch [].
D Setting the current time
1. Display the DATE/TIME screen.
»
SET > Time Set > Date/Time
2. Touch “Time.”
• Displays the time editing screen.
3. Touch [+] or [–] to set the current time.
4. Touch [SET] to set the time.
• Returns to the previous screen.
L To cancel the editing, touch [].
PROTECT: BAND
Cause:
Transmitted from the exciter while the frequency of
• The meter name indicator “P” blinks, and the linear
Solution:
Check for the following problems:
• The frequency band is not synchronized with an Icom
exciter.
L When the frequency band is synchronized, “AUTO” is
displayed under the frequency button.
•
PROTECT: POWER SUPPLY
Cause:
z An abnormal signal is detected from the power
supply unit.
z The output voltage of the AC power supply section
z There is an abnormality in the drain voltage or
• The meter name indicator “I blink, and the
Solution:
The power supply unit may be malfunctioning.
Contact your nearest Icom Dealer or Service Center.
To Next Page
Loading...
