9
9
Touch screen calibration
function
is activated after touching the screen, the touched and
In that case, the Touch screen calibration function
helps to correct the touch screen sensing accuracy.
1. Open the OTHERS screen.
»
SET > Others
Touch “Touch Screen Calibration.”
•
3. Touch the dot displayed on the screen.
•
Touch the displayed dot
4. Repeat step 3.
L
returns to the OTHERS screen.
TIP: When the touch screen is not accurate, and
you cannot access the OTHERS screen.
Do the following steps to display the “Touch Screen
Calibration” screen.
1. Turn OFF the linear amplifier.
While holding down
and
,
push
to display the “Touch Screen
Calibration” screen.
3. Repeat steps 3 and 4 in the above column.
4.
display on the touch screen to confirm that the
touch screen is correctly working.
Cleaning
DO NOT use harsh solvents such as
benzine or alcohol when cleaning,
because they will damage the linear
dirty, wipe it clean with a dry, soft cloth.
To Next Page
Loading...
