7
SET MODE
7-6
SD Card
»
SET > SD Card
Load Setting
L See page 6-3 for details.
Save Setting
Saves the setting data onto an SD card.
L See page 6-2 for details.
SD Card Info
Displays the SD card capacity.
Screen Capture View
Displays the selected screen capture.
L See page 8-3 for details.
Firmware Update
Format
If you use a brand-new SD card, be sure to format it in
L See page 6-1 for details.
Unmount
Unmounts the SD card.
ON, BE SURE to electrically unmount it. Otherwise,
the data may be corrupted or deleted. (p. 6-2)
Time Set
»
SET > Time Set > Date/Time
Date
Sets the date (Year/Month/Day).
L The day of the week is automatically set.
Time
Sets the current time.
L The time is displayed in the 24-hour format.
NOTE: The backup battery for the internal clock
The IC-PW2 has a lithium backup battery (CR2032)
for the internal clock and timer functions.
When the backup battery is exhausted, the linear
current time.
See page 9-3 for the battery replacement.
<<NTP TIME SYNC>>
Synchronizes the internal clock with a time
management server.
L To use this function, you need an Internet connection and
default gateway settings.
NTP Function (Default: ON)
Automatically obtains the current time from an NTP
server.
NTP Server Address (Default: time.nist.gov)
Sets NTP server address.
L See page 1-8 for details on entering characters.
»
SET > Time Set
UTC Oset (Default: ± 0:00)
CLOCK2 Function (Default: ON)
Displays the second clock on the screen.
CLOCK2 UTC Oset (Default: ± 0:00)
CLOCK2 Name (Default: UTC)
Sets the name of up to 3 characters for Clock 2.
L See page 1-8 for details on entering characters.
To Next Page
Loading...
