Icom ID-51A

New2001
xi
New2001
UNIqUE FUNCTIONS
1
QSORecordingfunction
2
AutoPositionReplyfunction
This section introduces unique functions built into the ID-
51A/E.
•SeethePDFtypeAdvancedInstructions’sformoredetails.
NOTE: This function requires a microSD card.
Repeat Voice TX
waiting screen
This is JA3YUA
JA3YUA
3
VoiceTXfunction
When you receive a call addressed to your own call sign, but
are in a situation that makes it difficult to operate the trans-
ceiver, this function automatically replies with your own call
sign and transmits your position.
•SeethePDFtypeAdvancedInstructions’sSection9fordetails.
YoucanrecordaQSOaudiointheMAINband.
You can select recording only the receive audio or both the
transmit and receive audio.
YoucanalsostoreandviewtheQSO/RXlogle.
•The log file stores following contents:
RX Frequency, Operating mode (DV is fixed), Call sign of the caller
station, Note after the call sign, Call sign of the called station, Ac-
cess repeater call sign of the caller station or the gateway repeater
call sign of your local area repeater, Access repeater call sign of
the called station, Message included in the received call (up to 20
characters), and so on.
•Seepage72orthePDFtypeAdvancedInstructions’sSection11
for details.
You can transmit recorded audio once or repeatedly, which is
useful for D-STAR events.
•SeethePDFtypeAdvancedInstructions’sSection17fordetails.
NOTE: This function requires a microSD card.
Destination
(ID-51)
Yourstation
q A call addressed to
your own call sign.
w Your position is auto-
matically transmitted.
e After receiving, the
screen shows the
position.