New2001
71
6
D-STAR OPERATION
New2001
!0 Push D-pad() to select “Re-
peater List Only,” and then
push D-pad(Ent).
!1 Push D-pad(Ent) to select
the file, and then the “Keep
'SKIP' settings in Repeater
List?”appears.
!2 Push D-pad() to select
“YES” or “NO.”
•When “YES” is selected, the
skip settings of the repeater list
are retained.
!3PushD-pad(Ent),“Loadle?”
appears.
!4 Push D-pad() to select
“YES,” then push D-pad(Ent)
to start the file check.
•While checking the le,
“CHECKING FILE” and a prog-
ress bar are displayed.
!5 After checking, settings data
loading starts.
•Whileloading,“LOADING”and
a progress bar are displayed.
!6 After loading, “COMPLET-
ED!” appears.
To complete the loading pro-
cess, reboot the transceiver.
Repeaterlistupdating
iscomplete!
Updating the repeater list (Continued) ■
To Next Page
Loading...
