Icom ID-51A Basic Instructions

New2001
30
3
MENU SCREEN
3
AutoPowerOFF
Turns the Auto power OFF function ON or OFF.
SDCard*
Sets the SD card options.
LoadSetting
Fileselection
Loads the settings file to the transceiver.
SaveSetting
<<NewFile>>
Saves the settings as a new file.
Fileselection
Saves the settings in a selected file.
Import/Export
Import or export the CSV format file.
Import
Selects to import the Your call sign, Repeater list, or GPS
memory data in the CSV format file.
Export
Selects to export the Your call sign, Repeater list, or GPS
memory data in the CSV format file.
CSVFormat
Selects the separator and the decimal character for the
CSV format.
Separator/Decimal
Selects the separator and the decimal character for the
CSV format.
Date
Selects the date format.
SDCardInfo
Displays the free space and remaining recording time of
the card.
Format
Formats the card.
Unmount
Unmounts the card.
Others
Sets other options.
Information
Voltage
Shows the voltage of the external DC power source.
Version
Shows the transceiver’s firmware version number.
Clone
CloneMode
Reads or writes the CS-51PLUS data from or to the PC.
CloneMasterMode
Sends the memory or setting data to other ID-51A/E.
The clone Master mode of the Transceiver to Transceiver.
Reset
PartialReset
Returns all settings to their defaults, without clearing the
memory contents, call sign memories or repeater lists.
AllReset
Clears all programming and memories, and return all set-
tings to their defaults.
MENU SCREEN

Icom ID-51A Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Antenna Connector	SMA
GPS Receiver	Yes
Waterproof	IPX7
Modes	FM, DV
Weight	255 g
Memory Channels	1304 channels
Output Power	5W (High), 2.5W (Middle), 0.5W (Low)