Icom ID-51A

77
New2001New2001
GPSOPERATION
8
New2001
■ GPSoperation
The ID-51A/E has a built-in internal GPS receiver. You can
check your current position and time.
D GPSreceivesetting
Check whether or not the GPS receiver is receiving your posi-
tion and time.
The GPS icon blinks when searching for satellites.
➪ ➪ ➪
The GPS icon stops blinking when the minimum number of
needed satellites are found.
•Itmaytakeonlyafewsecondstocalculateyourposition.Butde-
pending on the environment, it may take a few minutes. If you have
difficulties receiving, we recommend that you try a different loca-
tion.
•Whenthe“GPSSelect”itemissetto“Manual,”theicondoesnot
appear.
(GPS > GPS Set > GPSSelect)
Confirm the GPS icon is dis-
played on the LCD.
Push[QUICK] q
.
w Push D-pad() to select the
“GPS position” item, and then
push D-pad(Ent).
D-pad
(�)
(Ent)
■ CheckingyourGPSposition
You can check your current position.
If you transmit while displaying the GPS position screen, the
screen closes.
But you can check your current position, RX position, and so
on by touching the GPS icon while transmitting.
D DisplayingPositionData
Go to step e