17
2
STARTING INITIAL SETUP
New2001 New2001
D FormattingthemicroSDcard
•IfyouuseabrandnewmicroSDcard,formatthecard,by
doing the following steps.
•Formattingacarderasesallitsdata.Before formatting
any programmed card, make a backup file on your PC.
Push[MENU] q
.
•TheMENUscreenisdisplayed.
Push D-pad( w ) to select the root item (“SD Card”), and
then push D-pad(Ent).
Push D-pad( e ) to select “Format,” and then push D-
pad(Ent).
•Theconrmationscreen“FormatOK?”appears.
•Iftheitemisnotdisplayed,pushD-pad() one or more times to
select the page.
Push D-pad( r ) to select “YES,” and then push D-pad(Ent)
to format.
•Theformattingstartsandthedisplayshowstheformattingprog-
ress.
•NEVER turn OFF the power while formatting.
After formatting, the display automatically returns to the t
SD CARD menu.
Memory channels, item settings in the menu screen,
and repeater lists can be saved on the microSD card.
Saving data settings on the microSD card allows you
to easily restore the transceiver to its previous settings,
even if an all reset is performed.
■ SavesettingdataontoamicroSDcard(Recommend)
To Next Page
Loading...
Need help?
General
