Icom ID-51A Basic Instructions

New2001
xii
UNIQUEFUNCTIONS
4
NearFMRepeatersearchfunction
5
DVFastdatamode
6
Add-onfunctionsforD-PRS
7
Connectingan
Android™device
You can enter FM repeater data
using the DR function.
The function can find only FM re-
peaters in your transceiver’s re-
peater list.
•SeethePDFtypeAdvancedInstruc-
tions’s Section 6 for details.
When FM repeater is
selected.
D-PRS enables the transceiver to receive the Object, Item or
Weather data in addition to position data.
With the D-PRS add-on functions, you can receive informa-
tion such as an event, traffic, emergency or weather while
making a voice call in the DV mode.
•SeethePDFtypeAdvancedInstructions’sSection10fordetails.
UNIQUEFUNCTIONS
In addition to low-speed data communication, you can send
high-speed data using the DV Fast data mode.
The data speed of the DV Fast data mode is approximately
3480 bps, and is 3.5 times faster than the low-speed data
communication mode (approximately 950 bps).
•SeethePDFtypeAdvancedInstructions’sSection9fordetails.
You can connect a third party Android™ device through the
optional OPC-2350LU data communication cable.
When you connect an Android™ device to the transceiver,
you can use the extended D-STAR functions with the RS-
MS1A*, such as remote control operation or sending mes-
sages and/or pictures.
* The RS-MS1A is a freeware Android™ application.
•SeethePDFtypeAdvancedInstructions’sSection18fordetails.

Icom ID-51A Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Antenna Connector	SMA
GPS Receiver	Yes
Waterproof	IPX7
Modes	FM, DV
Weight	255 g
Memory Channels	1304 channels
Output Power	5W (High), 2.5W (Middle), 0.5W (Low)