Icom ID-51A - Using a Reflector

New2001
64
6
D-STAR OPERATION
6
Push D-pad( r ) to select
“Link to Reflector,” and then
push D-pad(Ent).
Push D-pad( t ) to select the
reflector that you want to link
to.
(Example: “REF002AL”)
Push D-pad(Ent). y
 •The transceiver returns to the
DR screen.
 •“Link to Reector” and “RE-
F002AL” are displayed in “TO.”
Holddown[PTT]tolinktothe u
reflector.
 •TheTX/RXindicatorlightsred.
Usingareector D
Hold down q for 1 sec-
ond.
Push D-pad( w ) to select “TO,”
and then push D-pad(Ent).
Push D-pad( e ) to select
“Reflector,” and then push D-
pad(Ent).
 •The“REFLECTOR”screenap-
pears.
D-pad
(�)
(Ent)
Push D-pad( r ) to select “Use
Reflector.”
Push D-pad(Ent). t
 •The transceiver returns to the
DR screen.
 •“UseReector”and“CQCQCQ”
are displayed in “TO.”
Holddown[PTT]tolinktothe y
reflector.
 •TheTX/RXindicatorlightsred.
D-STAR OPERATION