Icom ID-51A Basic Instructions

New2001
14
2
STARTING INITIAL SETUP
2
Repeat steps i y and u to
enter your own call sign of
up to 8 characters, including
spaces.
( For example: First J, then A,
then 3, then Y, then U, then A)
Push D-pad(Ent) to set the o
call sign.
 •Seetherightcolumnifyou
enter a note.
!0 Push D-pad(Ent) again to
save and return to the MY
CALL SIGN screen.
 •Twobeepssound.
!1 Push[MENU]
to exit the
MENU screen.
Beeps
Completed
[DIAL]
Selects/exits the
MENU screen
Moves the
cursor
Selects
Deletes
Shows the
QUICKMENU
Keysusedforinput
Convenient! ✓
If necessary, enter a note of up to 4
characters, such as the model of the
transceiver, name, area name, and so
on, after your call sign.
Push q D-pad() until the cursor
moves to the right of the “/”.
Repeat steps w y and u on the previous page to enter a
desired 4 character note.
(Example: ID51)
STARTING INITIAL SETUP

Icom ID-51A Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Antenna Connector	SMA
GPS Receiver	Yes
Waterproof	IPX7
Modes	FM, DV
Weight	255 g
Memory Channels	1304 channels
Output Power	5W (High), 2.5W (Middle), 0.5W (Low)