Icom ID-51A - Page 65

New2001
52
6
D-STAR OPERATION
6
Push D-pad( r ) to select the
call sign that you want to save,
and then push D-pad(Ent).
 •Example:“JM1ZLK”
The display changes to the
YOUR CALL SIGN EDIT
screen, and then the call sign
is automatically saved.
Push D-pad( t ) to select
“NAME,” and then push D-
pad(Ent).
 •Acursorappearsandblinks.
Rotate [DIAL] to select a y
desired character to enter a
name of up to 16 characters,
including spaces.
Go to step u
D-STAR OPERATION
Abouttextentry
•Push D-pad() to move the
cursor backward or forward.
•While selecting a character,
push [QUICK]
to change
the character to an upper case
or lower case letter.
•While selecting a digit, push
[QUICK]
to open the input
mode selection window.
- Push D-pad() to select
the desired Upper case let-
ters, Lower case letters, Numbers or Symbols.
- To enter symbols, select “!”#,” and then push D-pad(Ent)
to open the symbol character selection window. And ro-
tate[DIAL]to selectthedesired symbolcharacter, and
then push D-pad(Ent).
•Aspacecanbeselected,inanyinputmodeselected.
•Movethecursor,thenrotate[DIAL]toinsertacharacter.
•Rotate[DIAL]counterclockwisetoenteraspace.
•Ifyoumakeamistake,push[CLR]
to delete the se-
lected character, symbol or number,orholddown[CLR]
to continuously erase the characters, first to the right, and
then to the left of the cursor.
Inputmodeselection
window
Continued on the next page ☞