IMS ROBOTICS MICRO S - Page 42

MICRO S automatic Cutter motor
Number:
RH-11.014 A
Scope:
IMS Robotics
Document Management
Date:
08 July 2022
Author:
00145
Checked:
Page:
42 of 113
17. Loctite 574 orange to cable entry thread for the
other side of the sleeve
18. Firmly connect the cable entry and cover to the
cable sleeve
19. Reconnect the marked compressed air hoses to
the correct quick-fit connector and screw them
together
Make sure that the hoses and the cable wrap once
around the sliding hose and do not cross each other