Inficon Transpector XPR 3+ - Page 41

2 - 5
Transpector XPR 3+ Operating Manual
2.3.1.1.1 IMSSU Capabilities
The IMSSU has multiple built-in functions. All of these functions are available by
right-clicking on the sensor inside of the IMSSU. The right-click menu can be seen
in Figure 2-2, and the different functions are described in the following sections.
Figure 2-2 IMSSU right-click menu
Changing Transpector XPR 3+ IP Address
To change the IP address, right-click on the sensor and select
Change IP Address. The TCP/IP Properties window will display, see Figure 2-3.
Figure 2-3 IMSSU TCP/IP Properties window
The TCP/IP Properties window will display:
 Transpector XPR 3+ MAC Address
 the current Transpector XPR 3+ IP address
 a Change To text box, to enter the new Transpector XPR 3+ IP address
 a selection of either DHCP On or DHCP Off
To change the IP address, type the new IP address in the Change To box and click
Apply. Transpector XPR 3+ will automatically reboot and will return online with the
new IP address.
Alternatively, the IP address can be automatically assigned to Transpector XPR 3+
by selecting DHCP On (this is not recommended).
Launching Transpector Web UI
Transpector Web UI can be launched from inside of the IMSSU.