76 Description of the Menu
iina74e 06.fm technical handbook(1408)
6.8.2 Access to Trigger&Alarme menu
• Main Menu > Access Control > Access to Trigger&Alarme menu
That allows access to this function (see Chapter 6.4) even at a blocked menu access
(see Chapter 6.8.4).
6.8.3 Change Device PIN
• Main Menu > Access Control > Change Device PIN
The access to the UL5000 can be restricted by a Device-PIN. If the Device-PIN is not
0000 the UL5000 will ask for this PIN directly after power on. Without device-PIN the
UL5000 does not even switch on the pumps.
Notice: Under all circumstances memorize the PINs! The PIN can only be reset by
INFICON’s service organization.
6.8.4 Change Menu-PIN
• Main Menu > Access Control > Change Menu-PIN
The access to the menu can be restricted by entering or changing the personal
identification number (PIN). No PIN will be checked if 0000 is entered.
See Chapter 4.2.2.7 for the description of the entry.
Notice: Under all circumstances memorize the PINs! The PIN can only be reset by
INFICON’s service organization.