20 Installation
iina74e 02.fm technical handbook(1408)
For transportation tighten the screws again and fix them by the counter nuts.
2.2 Working Location
Move the UL5000 to the desired position and arrest the castors.
Fig. 2-3
The UL5000 is designed for indoor use only.
Ensure a sufficient air cooling. The air inlet as well as the air discharge openings
must never be obstructed.
The UL5000 can be locked by arresting the castors of the front wheels to avoid
movements on skewness.
Make sure that you can always reach the mains plug.
To Next Page
Loading...
