InfoPrint 6500 - Page 182

182
Chapter 4 Emulation Configuration Menu
Error Markers
• Enable (the default). Prints the following error markers for those
elements that print beyond the page boundaries:
>> for elements that begin off the right side of the page;
<< for elements that begin at the indicated position but end off the
page
for elements where the starting position of the command contains
an error other than an off-page error.
• Disable. Does not print error markers for those elements that print
beyond the page boundaries.
Off Page Errors
• Disable (the default). Does not report errors for elements that start or
end beyond the right edge of the page.
• Enable. Reports errors for elements that start or end beyond the right
edge of the page.
Bar Code Errors
• Enable (the default). Prints an error message when invalid bar code
data is encountered.
• Disable. Does not print an error for invalid bar code data and the bar
code will be printed as is.
Character Filtering
Ignore Characters
Determines if character filtering is enabled, or if one or both characters are
ignored.
• Disable (the default). Does not ignore the characters selected with
the select character options.
• Character 1. The character selected using the Select Character 1
option will be ignored in the data string.
• Character 2. The character selected using the Select Character 2
option will be ignored in the data string.
• Character 1 and 2. Both characters selected using the Select
Character 1 and Select Character 2 options will be ignored in the data
string.