InfoPrint 6500 - Page 239

Interior Cleaning
239
To obtain a hex code printout, perform the following steps.
NOTE: The asterisks (*) indicate steps specific to using the Coax/Twinax
interface menus which are only displayed when the Coax/Twinax
feature is installed.
Step Key Result Notes
1. Press NOT READY Places the printer in NOT
READY mode.
2. OPERATOR MENU
UNLOCKED
Press both keys at the
same time. Unlocking the
Operator Menu allows you
to test your printer.
3. OPERATOR MENU
PRINTER CONTROL
First of the series of
configuration menus.
*
OPERATOR MENU
COAX INTERFACE
Or
OPERATOR MENU
TWINAX INTERFACE
Moves forward to the
COAX INTERFACE or
TWINAX INTERFACE
option.
4. PRINTER CONTROL
INTERFACE SELECTION
Moves forward to the
INTERFACE SELECTION
option.
*
COAX INTERFACE
PRINT LANGUAGE
Or
TWINAX INTERFACE
PRINT LANGUAGE
5. PRINTER CONTROL
HEX PRINT MODE
Moves forward to the HEX
PRINT MODE option.
STOP
RETURN ENTER
+
MENU

SCROLL/
MICRO
ENTER

SCROLL/
MICRO
UNTIL
Hex Code Printout