Programming manual
About this manual 7
About this manual
MANUAL CODE
DCMPINE0PRIMEE
VERSION
1.40
MANUAL FOR
SYSTEM
PROGRAMMING
The Programming manual contains instructions for the configuration and programming of the
Prime system, as well as the descriptions of all the parameters and options, irrespective the
means chosen for system programming (keypad, software, etc.).
It also contains the instructions for commissioning, maintenance and troubleshooting
techniques.
0-1
Terminology
CONTROL PANEL,
SYSTEM, DEVICE
Refer to the control panel or any constituent part of the Prime intrusion control system.
LEFT, RIGHT,
BEHIND, ABOVE,
BELOW
Refer to the directions as perceived by the operator when directly in front of the mounted
device or computer screen.
QUALIFIED
PERSONNEL
Persons whose training, expertise and knowledge of the products and laws regarding security
systems, are able to create, in accordance with the requirements of the purchaser, the most
suitable solution for the protected premises.
SELECT
Click on a specific item on the interface (drop-down menu, options box, graphic object, etc.).
PRESS
Click on a video button, or push a key on the control-panel keypad.
0-2
Graphic conventions
Note
The notes contain important information relating to the text.
ATTENTION!
The “Attention” prompts indicate that total or partial disregard of the procedure could
damage the device or its peripherals.
To Next Page
Loading...