Programming manual
Programming peripherals 17
3-4
Sounder/flashers
3-4-1
Setting up sounder/flashers
Via software
Once the solution of the installation to be designed has been opened, access the “System
layout” section on the right. Here you can select the sounder/flasher to be configured and add
it to the configuration by double-clicking on the mouse.
In the section on the left, you can increase the number in correspondence to the sounder/
flashers button.
To remove a sounder/flasher from the structure, access the programming section by clicking
on the corresponding key in the menu on the left then, from the list displayed, click on the
Delete
button that corresponds to the line of the sounder/flasher to be deleted.
Via keypad
Type-in Code
(Installer PIN)
, PROGRAMMING Sounder/flashers, Enablements
This section allows you to add/remove sounder/flashers from the configuration, by means of
keys and .
WIRELESS
SOUNDER/
FLASHER
The Prime system provides wizards for the enrolling of wireless sounder/flashers.
Via software
Click-on the
Sounder/flashers
button on the menu on the left then, from the “Programming
- Configured Sounder/flashers” section, select the Sounder/flasher that is to be configured as
“Wireless” by means of the appropriate check box. This operation makes visible:
•the
Enroll
button, which allows the start of the enrollment procedure.
• the “Wireless monitoring” section
Pressing the
Start
button starts the monitoring process on the variation of the signal
transmitted by the device and background noise detected over time.
Via keypad
Type in Code
(Installer)
, PROGRAMMING sounder/flashers, ChoosePeripheral "sounder/flash-
er", Wireless
Once the
OK
button is pressed, it is necessary to work through the menu options and enroll
the keypad.
3-4-2
Programming sounder/flashers
Programming of sounder/flashers as peripherals of the Prime system can be performed either
via software or from a keypad.
Via software
Click-on the
Sounder/flashers
button on the menu on the left, the “Programming” section
will provide two sections.
•
Configured sounder/flashers
, with a list of all the configured sounder/flashers. By
selecting one of these items it is possible to set the parameters of the single sounder/
flasher by clicking on the button.
•
Sounder/flasher pattern
, section with the programming parameters of the pattern types
(tones). 8 modifiable patterns are available.
Via keypad
Type in Code
(Installer)
, PROGRAMMING Sounder/flashers, ChoosePeripheral
This section provides a list of the available sounder/flashers. From this list it is possible to
select a sounder/flasher for parameter programming.
3-4-3
Sounder/flasher parameters
Table 3-7: Parameters for single sounder/flasher
Parameter Software section Installer menu section
Description
Description string of the sounder/flasher
(customizable by the installer).
Configured sounder/
flasher, selected
sounder/flasher
Sounders, ChoosePeriph-
eral, "sounder/flasher"
Events
Button to open a window containing a list of the
events which activate the sounder/flasher.
Wireless
Check box for the assignment of the “Wireless”
attribute to the selected sounder/flasher.
To Next Page
Loading...