INIM Electronics Prime - Chapter 4 Programming from the Control panel; 4-1 Installer code; 4-2 Prime control panel

Programming manual
Programming from the Control panel 25
Chapter 4 Programming from the Control panel
4-1
Installer code
The installer code allows the installer to access the PROGRAMMING phase of the Prime
system. In fact, the system will request the PIN before allowing any programming from a
keypad via the installer menu or before allowing reading or writing operations from the Prime/
STUDIO software, that is, if it has not already been entered in the appropriate field.
The installer can set 2 installer codes (one personal and another) exclusively by accessing the
installer menu via a keypad:
Via keypad Type-in a valid code (Installer) , PROGRAMMING Installer code .
User code PINs must comprise 4, 5 or 6 digits.
Note In this section, the secondary installer code can access Inst.CodePIN2 section only.
Via software Any reading operations from the system or writing of software solutions on the Prime system
will be executed only after the installer code has been correctly entered.
This option is made available by clicking on the
Panel parameters button in the section on
the left and accessing the “Programming - Installer code” section on the right.
4-2
Prime control panel
Table 4-1: Installer code parameters
Parameter Installer menu section
ChangeInst. PIN
1
For security reasons, you must change the PIN of the
primary installer code (type-in twice).
The PIN is “9999” at default.
Installer Code
ChangeInst. PIN
2
For security reasons, you must change the PIN of the
secondary installer code (type-in twice).
The PIN is “9998” at default.
Inst.code 2
Use keys and to enable/disable the
sections of the installer menu the secondary installer
code can access.
Table 4-2: Control panel definition
Parameter Software section Installer menu section
Control panel
description
Edit field for the description of the control panel (max
50 alphanumeric characters).
Control panel
parameters
Not available
Serial number
Section where it is possible to view the univocal serial
number of the control panel.
Other parameters, Seri-
al number