INIM Electronics Prime - 9-2 Access to user menu; 9-3 User code parameters

Programming manual
Programming user codes 47
9-2
Access to user menu
Via software By clicking-on the Codes button in the menu on the left and selecting one of the items, it will
be possible to view the “User menu access” subsection in the “Programming” section.
The selection field will be displayed on the system keypads immediately after user code
validation:
•
Icons, function key shortcuts - displays the icons of the codes corresponding to the
function keys. At this point, the user can press the function keys and activate the
respective shortcut.
•
Shortcut text - displays the descriptions of the user shortcuts associated with the function
keys. The descriptions of the shortcuts will be shown in the place of the respective
shortcuts icons.
•
Standard user menu - accesses the user-menu scroll list containing all the operations the
user is enabled to perform. At this point, the user can scroll the list and select the required
operation.
Via keypad Type-in Code (Installer) , PROGRAMMING Codes, "code", Options
This section provides the “Text Menu” and “User Menu” options.
The combination of these two options allows immediate display on the keypad screens
immediately after user code validation. Refer to the following table.
In all methods of access (A, B and C), the key allows you to access/view the other
successive cases, see the figure opposite.
9-3
User code parameters
Table 9-1: Combinations “text menu” and “user menu”
Case Text menu User menu Description
A
Disabled Enabled
Accesses the standard user-menu (shown as a list
of operations the user is enabled to perform); at
this point the user can scroll the list using keys
and and select the required opera-
tion.
B Disabled Disabled
Display of the user-icons associated with function
keys , ..., ; at this point the user can
press the required function key and activate the
associated shortcut.
C Enabled Disabled
Shows the descriptions of the personalized user-
icons associated with function keys. The shortcut
descriptions will be shown instead of the shortcut
icons, at this point the user can use and
to scroll the list of shortcut descriptions
and select the shortcut, which can be activated by
means of the
key.
D Enabled Enabled The same as “ C ”
User Code
User Code
Manage alarms
Arm/Disarm op.
Voice functions
User Code
Stop alarms
Delete memory
Nexus status
A
B
C
Table 9-2: Single code parameters
Parameter Software section Installer menu section
Description
This is an editable programming field for the code
user's name.
Codes, selected
code
Codes, "code"
Partitions
Section for the selection of the partitions the code is
assigned to.
Type
Programming field for the assignment of the level in
the code hierarchy of the selected user.
The default level of code number 1 is “Master”; the
default level of all the other codes is “User”.
Codes, selected
code, Options