Installation and programming manual
Technical terminology and Glossary 117
A wireless-technology system in which the control panel and its devices are equipped with a
transmitter module and a receiver module.
These systems are more reliable than one-way wireless systems as each device transmission is
validated by a reverse transmission.
TWO-WAY WIRELESS
SYSTEM
A zone with this attribute cannot be bypassed, manually (by the user) or automatically (by the
control panel).
This attribute is usually assigned to high-security zones.
UNBYPASSABLE ZONE
If a terminal is configured as an "unused" terminal, it will not be included in the terminal
configuration.
This ensures that any "Unused" terminals on the expansion boards and keypads are still available
for use.
UNUSED TERMINAL
Each code is programmed with:
• A 4, 5 or 6 digit PIN which allows access the system.
• A label which identifies the user (usually the user's name).
• The group of partitions it controls (arms, disarms, etc.).
• A group of pre-set parameters which allow the operator to work on the system in accordance with its
authorized access level (for example, a code can be enabled to consult the events log but not to
change the date and time).
• A hierarchical level, that may allow the user to change to parameters of codes on a lower level in the
system hierarchy.
- User (the lowest level)
- Manager
- Master
USER CODE
List of functions available to the user after entry of a valid code at the keypad.
USER MENU
This is a delayed entry and exit zone and does not generate alarms when violation occurs during
the running entry/exit time, however, the violation will be signaled on the keypad.
VIEWABLE DELAYED
ZONE
This device allows the control panel to send voice calls to programmed contact numbers.
In SmartLiving control panels the voice dialler function is provided by the SmartLogos30M board
(accessory item).
VOICE DIALER
If the system is equipped with a SmartLogos30M voice board, all keypads with voice functions
present in the system configuration will allow users to record memos. Messages can be recorded,
played and deleted as required.
VOICE MEMO
Software application that allows you to view web contents over the internet.
WEB BROWSER
Software application that processes web page requests from a web browser.
The SmartLAN/G network board has an integrated web server that provides the browser with a
web interface for the management and supervision of the SmartLiving system.
WEB SERVER
An intrusion control system whose devices (detectors, keypads, keyfobs) communicate with the
control panel over radio waves.
Usually, in wireless systems, only the control panel is mains powered (230V
~), whereas the
system peripherals are battery powered. The battery life is of utmost importance in the design
layout and operational capacity of these systems.
WIRELESS
An electrical input point used for the management/supervision of signals coming from an intrusion
detection device. The terminal the zone is connected to must be configured as an “input” zone.
Zones are usually connected to a single device, however, it is possible (if the zone is duly wired
and configured) to connect more than one device. If a zone is connected to more than one device
it is impossible to identify the alarm-trigger device in the event of an alarm.
ZONE
The conditions which generate a zone alarm, on the understanding that the zone belongs to
several partitions, are as follows: the zone must detect violation and all the partitions it belongs to
must be armed.
Zone alarms trigger activation of audible and visual signalling devices (sounders, flashers, reader/
keypad LEDs, etc.) and generate voice and digital calls. Zone alarm events automatically generate
partition alarm events on all the partitions the zone belongs to.
A violated zone will not generate alarms if:
• it belongs to several partitions and one of them is disarmed
• it is inhibited
• it is in test status (the event will be saved to the events log only)
• it an “interior” zone, and one of the partitions it belongs to is armed in Stay or Instant mode
ZONE ALARM
To Next Page
Loading...
