Installation and programming manual
Options and programming methods 89
Enable/disable
This section allows you to enable/disable the digital keys:
1. Use keys and to select the digital key you wish to enable/disable.
2. Use keys and to enable/disable the selected digital key.
3. Press to confirm and exit.
Via PC
Select an item from “SmartLiving System - Users - Digital keys” from the tree menu on
the left, then go to the “Parameters settings” template on the right.
7-17
Arming scenarios
This section allows you to configure up to different 30 arming scenarios.
Via Keypad
1. Access “Arming scenarios” section.
Type-in Code
(Installer)
, PROGRAMMING Arming scenarios .
2. Use keys and to select the scenario thenpress .
Description
Editable field for the description of the scenario.
Icon
This section allows you to select the icon you wish to assign to the scenario, simply by
indicating the icon number (refer to Appendix B, Shortcuts at default):
1. Use keys and to scroll across the digits.
2. Use the number keys ( , etc.) to edit the number.
3. Press to confirm and exit.
The “Arm” shortcut associated with function key , ... , will visualize the icon
selected in this section.
Partitions
This section allows you to configure the scenarios of all the partitions managed by the
various models.
1. Use keys and to select the partition, then press .
2. Use keys
and to select the operating mode (Away, Stay, Disarm, etc.).
• None - the current operating mode of the partition will not be changed.
• Away - the partition will arm in Away mode (interior and perimeter).
• Stay - the partition will arm in Stay mode (perimeter only).
• Instant - the partition will arm in Instant mode (perimeter only with zero delay).
• Disarm - the partition will disarm.
Output
Each scenario, when applied, can activate one output (via keypad, at reader, over-the-
phone, etc.). Use and to select the output then press .
Note
It is possible to use a scenario to activate an output. This can be done through the Scenarios
section by simply leaving the respective “Partition” programming fields free (None), thus allowing
the association of the Icons with the outputs.
3. Press to confirm and exit.
Via PC
Select an item from “SmartLiving System - Scenarios” from the tree menu on the left, then go
to the “Parameters settings” template on the right.
SCENARIO 001
Description
Icon
Partitions
PROGRAMMING
Installer Code
Keys
Arming Scenarios
Arming Scenarios
SCENARIO 001
SCENARIO 002
SCENARIO 003
To Next Page
Loading...
