INIM Electronics SmartLiving 10100L - Patents Pending; Manuals

Installation and programming manual
General information 7
• IB100/RU BUS isolator board (accessory item)
• ProbeTH thermal-probe kit for battery-charge optimization (accessory item)
• TamperNO tamper-protection kit (accessory item)
• Backup battery, 12V @ 7, 9 or 17Ah (depending on the control panel)
• Motherboard (IN082 and IN088) integrated Type B notification apparatus
The compliance of the control panel is also guaranteed when connected to the following
certified devices:
• FLEX5/P input/output expansion boards
• Joy/MAX, Joy/GR, Aria/HG, Concept/G, nCode/G, Alien/G, Alien/S keypads
• nBy/S outdoor-mount proximity readers
• nBy/X universal-mount proximity readers
• IB100/RP BUS isolator
• Self-powered IB100/A BUS isolator
• nCard access-control card for proximity readers
• Tag for nKey or nBoss proximity readers
• Self-powered sounderflashers for outdoor installation: Ivy, Ivy-F, Ivy-M, Ivy-FM, Ivy-
B, Ivy-BF, Ivy-BM, Ivy-BFM
• Wireless devices AIR2, AIR2-BS200 (transceiver), Air2-IR100 (PIR detector), Air2-
MC100 (magnetic contact)
• SmartLinkAdv/GP, SmartLinkAdv/G, SmartLinkAdv/P communicators
1-4 Patents Pending
The SmartLiving series of control panels employs the following INIM-patented
technologies.
• Input/Output Terminals : each terminal on-board the control panel, keypads and
expansion boards can be configured as either an input or output zone.
• nBy/X proximity reader: this reader has been especially designed to flush-mount
to all models of electrical light-switch backboxes.
• Learn zone balancing: this option allows the control panel to save the balancing
values of all the system zones automatically, thus eliminating the task of typing
them in.
1-5 Manuals
1-5-1 Installation and
programming manual
(this manual)
This manual (not included in the package) can be purchased from your retailer. You (the
installer) should read carefully through it in order to become familiar with all the
components and operating procedures of the SmartLiving system.
In order to provide adequate protection, the installer must adhere to all the
manufacturer's guidelines relating to the active and passive security devices of this
system.
1-5-2 Installation and
programming guide
The guide, supplied with each control panel, provides all the instructions and
illustrations necessary for fast installation and programming of the SmartLiving system.
It provides step by step descriptions of the procedures required for the system wiring,
the various connections and first powerup. It also provides a table for the peripheral
addressing process and a quick guide indicating default parameters and values and how
to program/change them directly from the keypad.
1-5-3 User's manual
The installer should read carefully through the user's manual (supplied with each
control panel). Once the system has been installed, the user manual must given to the
users for consultation. The user must fully understand all the system functions and the
configuration settings.
It is the installer's responsibility to inform the system users that, regardless of its
capabilities, an intrusion alarm system is not a substitute for the necessary precautions
building occupants must take to prevent intrusion.