Installation and programming manual
The control panel and peripherals 15
The nBy/S reader is suitable for outdoor installation and operates best under the
following conditions:
• Temperature: from -25° to +70°C
• Maximum humidity: 93% (without condensation; for 30 days per year granting
that the relative humidity can touch points of 95% without
being subject to condensation)
• Protection grade:IP 34
• Environmental class:IV
2-3
Peripherals
The control panel I-BUS accommodates the following peripherals:
• JOY/GR, JOY/MAX, Aria/HG, nCode/G, Concept/G, Alien/G e Alien/S keypads
• Readers (nBy/S and nBy/X)
• Expansions (Flex5)
• Transceiver (Air2-BS200)
• Sounderflashers (Ivy-B)
•Isolators (IB100)
• GSM dialer (Nexus)
2-3-1
Joy/GR and Joy/MAX keypads
• Backlit graphic display
• Icon Easy4U interface
•4 indicator LEDs
• Signal buzzer
• Tamper and opening protection
• Mounts to “503” outlets
• 2 Input/Output terminals
Joy/MAX only:
• Thermometer and chronothermostat function
• Microphone and loudspeaker for voice functions
• Built-in proximity reader
Tabella 2-13:
Joy - electrical and mechanical features
Joy keypads models JOY/GR JOY/MAX
Voltage
from 9 to 16V
Typical current draw
70mA 90mA
Terminals configurable as OC outputs
2
Maximum current draw per terminal
150mA
Dimensions (W x H x D)
142 x 116 x 20 mm
Weight
160g 180g
Tabella 2-14:
Joy - description of parts
A
Terminal board
B
Buzzer
C
Microphone (Joy/MAX only)
D
Temperature sensor (Joy/MAX only)
E
Open-tamper microswitch
F
Backlit graphic display
G
Signaling LEDs
H
Antenna (Joy/MAX only)
I
Speaker-wire connector (Joy/MAX only)
J
Wire entry
K
Wall-mount screw locations
L
Speaker housing
M
Board supports
N
Dislodgement-tamper microswitch screw location
O
Dislodgement-tamper microswitch spring
To Next Page
Loading...
