Installation and programming manual
Installation project via the SmartLeague 51
Chapter 5
INSTALLATION PROJECT
VIA THE SMARTLEAGUE
The especially designed SmartLiving system can be programmed from a keypad or via
PC. All programming functions can be accessed through the software programme. You
will need:
• A computer (to be connected to the control panel)
• The SmartLeague software program
5-1
The SmartLeague software
program
The SmartLeague software program allows the installer to prepare the majority of the
parameters/settings without actually being connected to the control panel.
However, connection is required during the upload and download operations. The type
of connection depends on the method used for read/write operations to and from the
control panel:
• RS232 serial port of the PC
• LAN (combined with the use of a SmartLAN/SI or SmartLAN/G board)
•Modem
•Inim Cloud
The programming parameters of an installation constitute the “solution”. The solution
can be saved to the memory of the SmartLeague software programme, either for future
use or as a “model” for other installations.
The homepage of the SmartLeague software program is common to all the
programmable devices and is always active, even during the programming session (in
the form of a template):
Table 5-1:
SmartLeague - homepage
A
The menu bar, application icons and
programming accessories.
B
List of recent solutions - which will
allow you create new solutions or
open existing solutions
C
Documentation installed on the com-
puter.
D
Help area: via the Internet, it is pos-
sible to consult FAQ page, make
enquiries and suggestions via e-mail.
E
Access to the area reserved for reg-
istered users of the INIM website.
After typing in a Username and Pass-
word, you can access the updated
versions of the software programme,
firmware, technical documentation
and service.
To Next Page
Loading...
