118 Shortcuts at default
Anti-intrusion control panels
Appendix B
SHORTCUTS AT DEFAULT
n. Icon description function parameter n. Icon description function
1
Arm/Disarm
Applies a pre-set scenario
which sce-
nario
20
Voice memo
Accesses the user menu
section: Voice functions
2
Stop alarms
Immediately deactivates
the outputs relative to
zone/partition alarm and
tamper events and system
tamper events.
21
Output control
Accesses the user menu
section: Outputs ON/OFF
3
Clear call queue
Cancels the entire call
queue and stops ongoing
calls (if any).
22
Enab.answer-
phone
Accesses the user menu
section: Activations/
Answerphone
4
Delete memory
Carries out a “Stop alarms”
operation and, at the same
time, deletes memory of
system and partition alarm
and tamper events.
23
Enab.teleservice
Accesses the user menu
section: Activations/Teleser-
vice
5
Activate Output
Activates one of the pro-
grammed outputs.
Output 24
Enable codes
Accesses the user menu
section: Activations/Codes
6
Deactiv. output
Deactivates one of the pro-
grammed outputs.
Output 25
Enable keys
Accesses the user menu
section: Activations/Keys
7
Overtime
Delays auto-arming time of
partitions by 30 minutes.
26
Enable timers
Accesses the user menu
section: Activations/Timers
8
Teleservice req.
Sends a call to the Installer
company number (Teleser-
vice number).
27
Enab. auto-arm
Accesses the user menu
section: Activations/Auto-
arming
9
Voice menu
Plays a recorded voice mes-
sage which announces the
shortcuts assigned to the
number keys.
User code 28
View events log
Accesses the user menu
section: View/Events log
10
Listen-in
Allows eavesdropping over-
the-phone by means of a
microphone located on suit-
ably placed keypad.
Keypad 29
View alarm log
Accesses the user menu
section: View/Alarms log
11
Intercom Call
Accesses the user menu
section: Voice functions/
intercom Call
30
View faults log
Accesses the user menu
section: View/Faults log
12
Arm/disarm
menu
Accesses the user menu
section: Arm/Disarm
31
View arm ops log
Accesses the user menu
section: View/Arm/Disarm
op.
13
Alarm menu
Accesses the user menu
section: Manage alarms
32
ViewSystemSta-
tus
Accesses the user menu
section: View/System sta-
tus
14
Voice func.
menu
Accesses the User Menu
section: Voice functions
33
View zone status
Accesses the user menu
section: View/Zone status
15
Activations
menu
Accesses the user menu
section: Activations
34
Change PIN
Accesses the user menu
section: Change PIN
16
View Nexus sta-
tus
Accesses the user menu
section: View/Nexus status
35
Time/Date
Accesses the user menu
section: Time/Date
17
Arming status
Provides voice information
regarding the armed/dis-
armed status of the parti-
tions.
36
View faults
Accesses the user menu
section: View/Faults
18
Keypad
sett.menu
Accesses the user menu
section: Keypad settings
37
Thermostat
menu
Accesses the user menu
section: Thermostat
19
ZoneBypass
menu
Accesses the user menu
section: Activations/Zones
19 38
Panic
Activates a “Panic” event
To Next Page
Loading...
