54 Inim Cloud
Anti-intrusion control panels
Chapter 6
INIM CLOUD
The INIM Electronics Cloud service provides SmartLiving users with a further mode of
intrusion panel management via Internet.
The connection of control panels to the Cloud service is achieved via a web interface
(the AlienMobile+ App or any browser) without any need to configure the network on
which the control panel is installed. In particular, it is not necessary to program a router
to perform port-forwarding and the like in order to reach the control panel.
Intervention with regard programming relating to network operations is not required on
SmartLAN cards, since these cards are programmed by default with DHCP enabled
(option to automatically assign an IP address to the devices on the network).
To use the Cloud Service as an installer, you must create your own account at
www.inimcloud.com
and follow the guided registration procedure.
After correct registration, the installer will receive a confirmation email and an email
with an "Installer ID" (Cloud installer 8 digit code), by means of which the installer can
carry out operations that will enable Cloud access on already installed systems.
Once logged in, the installer will have access to a customized web interface which has
all the tools to:
• register new control panels
• associate or cancel the customer users with the control panels
• supervise the registered control panels
• manage the installer profile
6-1
User levels
The Inim Cloud service provides three different user levels, relating to a single control
panel. The ratings may be different in your profile, depending on the control panel:
• Supervisor, corresponds to the installer.
• Admin, corresponds to the first user who registers the control panel to their cloud
profile and who can, through a web interface, supervise the system.
And who, by accessing their profile, can delete the control panel from their own
account or that of other users.
Furthermore, can pass the title of “Admin” to another user.
• User, is a user who has registered the control panel to their cloud profile and who
can, through a web interface, supervise the system or delete the control panel from
their own account.
OWNERSHIP
The “owner” attribute allows a user to delete a control panel from the supervisor's
account. It can be assigned both the installer and the end user by the installer during
registration of the control panel to cloud.
Therefore, if “owner” is the user, they can enable/disable other users and the installer
who supervises the system.
If, instead, “owner” is the installer, they can enable/disable themselves and the “Admin”
user.
Note
If an installer “owner” disconnects a control panel, disabling themselves, it will no longer be
accessible in the cloud for each user.
To Next Page
Loading...
