88 Options and programming methods
Anti-intrusion control panels
6. Once you have completed the enrolling process, press or .
Note
All the enrolled keys will be enabled to operate the system immediately.
Key parameters
This section allows you to programme all the parameters of the selected digital key.
• Description - editable field for the name of the digital key user.
• Partitions - the partitions the digital key is assigned to and therefore can control.
• Options - activated by means of keys and , are:
• Timers - this section allows you to associate a timer with the digital key. The key
will be able to operate the system only when the associated timer is “On”.
• Shortcuts - this section allows you to programme up to 4 shortcuts (F1, F2, F3, F4)
for each key.
The shortcut associated with the key can be one of the following types:
•• None
•• Arm/disarm
•• Stop alarms
•• Clear Call Queue
•• Delete memory
•• Activate Output
•• Deactiv. outputs
•• Overtime
•• Teleservice req.
•• Voice guide
If a digital key is held in the vicinity of an nBy/S or nBy/X reader, the LEDs will run
through a series of visual signals with the following meanings:
Delete key
This section allows you to delete enrolled digital keys from the system configuration.
The enrolled digital keys can be found in the list with the symbol.
1. Use keys and to select the enrolled digital keys you wish to delete.
2. Press to delete the selected digital key.
3. Press to confirm and exit.
Table 7-13:
Key options
Option If enabled If disabled
Patrol
The digital key will be able to disarm specific parti-
tions for patrol purposes.
Maintenance
The digital key will be able to block alarm/tamper
outputs for the time that it is held in front of a
reader.
Use
keyShortcuts
If a digital key is held in the vicinity of a reader, only
the digital key shortcuts will be indicated, and not
the reader shortcuts.
If a digital key is held in the vicinity of a reader,
only the reader shortcuts will be indicated and, if
configured, the first shortcut programmed on the
digital key.
These options do
not apply to
Air2-KF100
wireless
keyfobs.
DisarmNotAllo
wed
If a digital key is held in the vicinity of a reader
when partitions are armed, the Disarm option will be
inhibited (all LEDs Off).
If a digital key is held in the vicinity of a reader
when partitions are armed, the Disarm option will
be allowed (all LEDs Off).
Table 7-14:
Readers - LED visualization
LED indicator sequence
Option: Use keyShortcuts
enabled disabled
1
Red LED On Digital key shortcut F1 shortcut associated with the red LED on the reader
2
Blue LED On Digital key shortcut F2 shortcut associated with the blue LED on the reader
3
Green LED On Digital key shortcut F3
shortcut associated with the green LED on the
reader
4
Yellow LED On Digital key shortcut F4
shortcut associated with the yellow LED on the
reader
5
All LEDs On This sequence does not occur Digital key shortcut F1
6
All LEDs Off
Option: DisarmNotAllowed
enabled disabled
No request to arm ALL the partitions common to
both the key and reader.
Request to arm ALL the partitions common to both
the key and reader.
To Next Page
Loading...
