Appendix 1 Certifications and Standards Compliance
‑144‑
5 Appendix 1 Certifications and Standards Compliance
5.1 Compliance List
Table 5–1 Compliance list
Certifications
Directives Standards
CE
EMC
2014/30/EU
EN IEC 61800‑3
LVD
2014/35/EU
EN 61800‑5‑1
EN 60034
RoHS
2011/65/EU
EN 50581
UL/cUL
certification
‑
UL61800‑5‑1
C22.2 No.274‑17
UL 1004‑6
CSA C22.2 No. 100‑14
Note
The drive complies with the latest version of directives and standards for CE and UL/cUL
certifications.
5.2 CE Certification
Figure 5‑1 CE mark
● The CE mark indicates compliance with the Low Voltage Directive (LVD),
Electromagnetic Compatibility (EMC), and Restriction of Hazardous Substances
(RoHS) directives.
● The CE mark is required for engaging in commercial business (production,
importation, and distribution) in Europe.
● The servo drive complies with LVD, EMC, and RoHS directives and carries the CE
mark.
● Machines and devices integrated with this drive must also comply with CE
requirements for distribution in Europe.
● The integrator who integrates this drive into other products and attaches CE mark
to the final assembly has the responsibility of ensuring compliance with CE
certification.
To Next Page
Loading...
Need help?
General
