Wiring
‑88‑
Figure 3‑20 Recommended power cables
Observe national or regional regulations when selecting cable dimensions. The IEC
cable must meet the following requirements:
● Complying with standards EN 60204‑1 and IEC 60364‑5‑52
● PVC cable with copper conductors
● Allowing the cable surface temperature to be lower than or equal to 70℃ under an
ambient temperature of 40℃ (When the ambient temperature exceeds 40℃,
contact Inovance.)
Requirements for UL cable selection are described in “
Cable requirements
”
on page
148
.
Note
If the recommended cable specifications for peripheral devices or optional parts exceed the
applicable cable specification range, contact Inovance.
3.5.4 Wiring of the Power Supply
● Single‑phase 220 V models: SV660PS1R6I, SV660PS2R8I, SV660PS5R5I,
SV660PS7R6I, and SV660PS012
To Next Page
Loading...
Need help?
General
