Installation
‑29‑
No. Name
3
Cushion
4
Carton box
2.1.2 Installation Environment
Table 2–2 Environment requirement
Item
Requirement
Installation
location
Indoors
Grid
overvoltage
Overvoltage Category III (OVC III)
Altitude
The maximum altitude is 5000 m.
● For altitudes not higher than 1000 m, derating is not required.
● For altitudes above 1000 m, derate 1% for every additional 100 m.
● For altitudes above 2000 m, contact Inovance.
Temperature
● Mounting/Operating temperature: 0℃ to 55℃
For temperatures between 0℃ to 45℃, derating is not required. For
temperatures above 45℃, derate 2% for every additional 1℃.
● Storage/Transportation temperature: ‑40℃ to +70℃
● To improve the reliability of the machine, use the servo drive in
environments without dramatic temperature change.
● When installing the servo drive into an enclosed environment such
as a control cabinet, use a cooling fan or air conditioner to keep the
temperature of the inlet air below 45℃. Failure to comply will
result in over‑temperature or a fire.
● Install the servo drive on the surface of an incombustible object
and leave sufficient surrounding space for heat dissipation.
● Take measures to prevent the servo drive from being frozen.
Ambient
humidity
Below 90% RH (without condensation)
Storage
humidity
Below 90%RH (without condensation)
Vibration
Below 4.9 m/s
2
● During transportation with packing box: compliant with EN 60721‑
3‑2 Class 2M3
● During installation without packing box: compliant with ISTA 1H
Impact
Below 19.6 m/s
2
To Next Page
Loading...
Need help?
General
