Installation
‑36‑
Item
Description
Routing
As shown in the figure below, route the servo drive cables
downwards to prevent liquids from flowing into the servo drive
along the cables.
Dust‑proof cover
(included in the
standard
configuration)
Insert the dust‑proof cover into the communication port (CN3/
CN4) not in use. This is to prevent unwanted objects, such as
solids or liquids, from falling into the servo drive and resulting in
faults.
Each servo drive is delivered with two dust‑proof covers. You can
also place an order for more dust‑proof covers as needed (model:
NEX‑02‑N2B; manufacturer: PINGOOD).
Note:
● Dust‑proof cover: Prevents unwanted objects, such as solids
or liquids, from falling into the servo drive and leading to
faults.
● Dust‑proof covers are delivered along with the servo drive.
Keep the dust‑proof covers in a proper place.
2.1.6 Installation Instructions
The servo drive supports backplate mounting only.
To Next Page
Loading...
