Inovance SV660P Series - Connecting the Encoder (CN2); Installing Absolute Encoder Battery Box

Wiring
‑100‑
Table 3–23 Description of the power cable connector (motor side)
Applicable
Motor Flange
Size
[1]
Outline Drawing of the
Connector
Terminal Pin Layout
Pin No.
Signal Name
Color
100
130
MIL‑DTL‑5015 series 3108E20‑
18S aviation connector
B U
Blue
I V
Black
F W
Red
G PE
Yellow/Green
C
Brake
(polarity
insensitive)
Red
E
Black
Table 3–24 Description of the power cable connector (motor side)
Applicable
Motor Flange
Size
[1]
Outline Drawing of the
Connector
Terminal Pin Layout
Pin No.
Signal Name
Color
180
MIL‑DTL‑5015 series 3108E20‑
22S aviation connector
A U
Blue
C V
Black
E W
Red
F PE
Yellow/Green
B
Brake
(polarity
insensitive)
Red
D
Black
Note
● [1] The flange size refers to the width of the mounting flange.
● Power cable colors are subject to the actual product. All cable colors mentioned in
this guide refer to Inovance cable colors.
3.7 Connecting the Encoder (CN2)
3.7.1 Installing Absolute Encoder Battery Box
The optional S6‑C4 battery box contains the following items:
● One plastic body
● One battery (3.6 V, 2600 mAh)
● Terminal block and crimping terminal