To Next Page

To Previous Page

Pro 2 does not have maximum capacity limits on SD card / TF (MicroSD) card

Note for removing storage card

As the file directory structure is more complex in Pro 2, please make sure to turn o the camera before pulling out

storage cards. If the storage card is pulled out when the camera is on, files may fail to be stored completely in very

few cases. Therefore please make sure to turn o the camera first before removing any storage card.

How to use camera to format a SD card

Frequent recording of high-resolution video will lead to accumulation of data fragments generated by multiple files,

aecting the card speed. So, it is recommend to periodically format storage devices, especially before important

shooting.

Pro 2 has feature of standby formatting and is easy to operate. Using Pro 2 camera to format saves hours and is more

completed than using computer soware. It is strongly recommended to use the camera to format storage devices.

Detailed operation steps are shown below.

1. Select camera settings on the screen menus, sequentially, Settings -Storage-Storage Space

2. Under this menu, you can view the amount of available capacity / residual capacity information of storage devices

inserted in the current camera. Press the Power button to click on a storage device into the next step to be

formatted, and then the camera will remind you whether to proceed with formatting, continue to click on the

Power button to confirm and then it will start to format the selected storage device. (Please note that before

formatting, you must backup the original data on storage devices and the data cannot be restored once

formatting completes.)

(1) Once formatted, if you are prompted by Formatted success, it means that formatting succeeds.

(2) If it shows "Formatted completed with fragments le", it means formatting is completed, but there are still

some file fragments existing. The SD card cannot be formatted into the required format, please contact the

manufacturer of the card to fix it or replace with a new card.

Insta360 Pro2 User Manual

Questions and Answers: