3. If consecutive shooting lines are taken, blue lines will appear in street view maps. If they are separate locations, there
will be blue dots in street view maps. If what you took were continuous shooting lines but what appear on maps were
points, there may be two reasons: 1. excessively fast speed, resulting in large GPS data displacement, which is
identified by Google as independent location. 2. GPS signals are blocked. They are identified by Google as
independent locations. So it's important to ensure that GPS signals are stable and not to move too fast.
4. If what uploaded to Google Street view is of high quality, it will be selected by Google to join Google earth display.
6.1 [Advanced] Manual exposure and curve adjustment
Automatic exposure algorithm takes equalized exposure of overall image. It may be inaccurate to expose in certain
scenarios so that manual exposure settings can be used to shoot.
Under the mode of photographing and timelapse, there are three modes for exposure: automatic exposure, manual
exposure and isolated exposure. Two exposure modes of shutter priority and ISO priority have been newly added. Shutter
priority or ISO priority exposure mode cannot preview the eect in real time. When photographing in manual exposure
mode, ISO (100 ~ 6400), shutter (1/30s ~ 1/8000 s) and white balance (Auto, 2700K, 3200K 4000K, 5000K, 6500K, 7500K)
can be adjusted.
When recording, you can select from three modes of automatic exposure, manual exposure and isolated exposure. ISO
(100 ~ 6400), shutter (1/30s ~ 1/8000s), white balance (Auto, 2700K, 3200K 4000K, 5000K, 6500K, 7500K) can be adjusted in
manual exposure mode.
When using control client terminal to connect camera to shoot, you can use curve function (similar to PS curve) to make
real-time adjustment in each exposure part.
To Next Page
Loading...
Need help?
General
