4. Resolution, frame rate, bitrate setting
Select the desired resolution based on your choice of live platform. If the settings have no desired resolution, click
"Customize" to set your desired resolution (resolution cannot be greater than 3840 * 3840).
Note: when viewing with mobile phone, the recommended encoding rate should be 4Mbps. If there’s video lag, you
should first exclude whether it is caused by phone lag, if not, please select lower bitrate ( in many cases the reason
for video lag is because upload bandwidth isn't enough).
5. Custom Rtmp Server
If you select "Custom Rtmp Server”, here you can fill out the push address "URL" and "Stream Key" provided by the
platform.
4.2.2 [Beginner] Push mode: internal push, server push,
HDMI output
Build-in Server
It's suitable for computer local playback. Connect computer to Pro 2, select "Built-in Server", click "LIVE", open computer
player, input the URL address displayed in Pro 2 push settings, such as:
Custom Rtmp Server
This is to push live streaming onto panoramic live platforms.
HDMI Output
Output through HDMI line to display, director station, computer etc.
To Next Page
Loading...
Need help?
General
