EasyManuals Logo

Insta360 Pro2 User Manual

Insta360 Pro2
249 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
1. Enter the settings menu of Pro 2, set Ethernet to DHCP mode.
2. Connect Pro 2 to router through network cable, and the router's allocation mode needs to be DHCP, and the
computer connects to router’s LAN.
3. Ensure camera and computer are inside the same LAN, open the controlling client soware on the computer, and
input IP address displayed on top of the camera screen.
Wired connection -- Direct connection mode
1. Enter the camera settings menu of Pro 2, set Ethernet to DHCP mode.
2. Connect Pro 2 to computer with network cable. If you want to connect some computer without Internet access, then
you need to switch to USB port by using the transverter. In this mode, the IP address of Pro 2 is fixed as
192.168.1.188, which requires to set up static IP for the PC network segment of 192.168.1. And it is recommended to
set as 192.168.1.100, with the subnet mask of 255.255.255.0.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Insta360 Pro2 and is the answer not in the manual?

Insta360 Pro2 Specifications

General IconGeneral
Battery5100mAh removable battery
HDRYes
ISO Range100-6400
Resolution8K (7680x3840) at 30fps
LensF2.4
Stabilization6-axis gyro stabilization
Audio3.5mm external mic input
Weight1550g
ConnectivityWi-Fi, Ethernet, USB Type-C
Video Resolution8K at 30fps, 6K at 60fps, 4K at 120fps
Video EncodingH.264, H.265
StorageUSB 3.0
Live Streaming4K live streaming
Shutter Speed1/8000s

Related product manuals