Burst is to shoot 10 groups of photos. The continuous capture is carried out based on the camera shutter speed, so the
shutter speed is 1 / 10s to the minimum. 10 continuous captured photos can be exported. This mode can be used in
taking group photos and static scenes.
For Burst super-resolution shooting, if you want to synthesize 12K super-resolution image in post-production, you need to
shoot in static environment, because the 10 photos taken by continuous shooting are limited by shutter speed and
shooting intervals, and the camera cannot continuously capture in a high speed. Moving characters or objects will cause
ghosting on the synthetic images. Concrete results are shown in 2.3.2.
2.2.3 [Advanced] Method for aerial-shooting panoramic
picture
When Pro 2 is mounted on the aircra, using Farsight can monitor and manipulate it within 1 km distance.
2.3.1 [Beginner] Photo stitching by Stitcher
1. Format of photo files
To Next Page
Loading...
