EasyManuals Logo

Integra DRX-8.4 User Manual

Integra DRX-8.4
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #111 background imageLoading...
Page #111 background image
111
Playback
Selecting a source to play in Zone 3
1. While pressing the Zone 3 Hold button on the remote controller, press the
input selector of the input you want to play in the separate room.
To control on the main unit, press the Zone 3 button on the main unit and then
within 8 seconds press the input selector button of the input you want to play
in the separate room.
2
1
Adjusting the volume in Zone 3
When ZONE 3 speakers are used
1. While pressing the Zone 3 Hold button on the remote controller, adjust with
the volume buttons. To control on the main unit, press the Zone 3 button on
the main unit and then within 8 seconds adjust with the Master Volume dial.
2
1
When using an Integrated amplier in the separate room
1. Use the volume dial on the integrated amplier to adjust the volume.
When using an integrated amplier that does not have a volume control,
adjust using the same procedure described in "When ZONE 3 speakers are
used".
When connecting an integrated amplier that does not have a volume
control, in the Setup menu, set "Multi Zone" - "Zone 3" - "Output Level"
( p162) to "Variable". If you do not set this, the volume output will be
very loud and there is a danger of damage to the integrated amplier,
speakers, etc.

Table of Contents

Other manuals for Integra DRX-8.4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Integra DRX-8.4 and is the answer not in the manual?

Integra DRX-8.4 Specifications

General IconGeneral
Channels11.2
Amplification TypeClass AB
THD+N0.08%
HDMI Inputs7
HDMI 2.1Yes
HDR SupportHDR10, Dolby Vision, HLG
eARCYes
Phono InputYes
Zone 2/3 Powered OutputsYes
USB Input1 (Front)
EthernetYes
Wi-FiYes
BluetoothYes
Standby Power Consumption0.15 W
Power Output (8 Ohms, 20 Hz-20 kHz, 0.08% THD, 2 Channels Driven, FTC)140W
Power Output (6 Ohms, 1 kHz, 10% THD, 1 Channel Driven)250 W/Ch
Input Sensitivity and Impedance200 mV/47 kOhms (Line)
Signal-to-Noise Ratio106dB
Speaker Impedance4 Ohms – 16 Ohms
HDMI Outputs3
Digital Audio InputsOptical: 2, Coaxial: 1
Pre-Outs11.2 Ch
Speaker Terminals11
Streaming ServicesAirPlay 2, Spotify, Tidal, Deezer
Voice ControlAmazon Alexa, Google Assistant
Room CorrectionAccuEQ
Supported Audio FormatsDolby Atmos, DTS:X
Weight14.5 kg (32 lbs.)

Related product manuals