Installing and Replacing Desktop Board Components
39
Setting the BIOS Configuration Jumper
NOTE
Always turn off the power and unplug the power cord from t he com put er before
changing the j um per. Moving the jum per wit h the pow er on m ay result in unreliable
com puter operation.
Figure 14 show s t he locat ion of t he Desktop Board’s BI OS configuration j um per block.
Figure 14. BIOS Configuration Jumper Block
The t hree- pin BI OS configurat ion j um per block enables board operat ing m odes.
Table 12 show s the j um per set t ings for each of t he available m odes.
To Next Page
Loading...
Need help?
General
