Intel S2600IP User Manual

Intel® Server Board S2600IP and Intel® Workstation Board W2600CR TPSAppendix B: BMC Sensor Tables
Revision 1.1
Intel order number G34153-003
123
- T: Threshold value
 Rearm Sensors
The rearm is a request for the event status for a sensor to be rechecked and updated
upon a transition between good and bad states. Rearming the sensors can be done
manually or automatically. This column indicates the type supported by the sensor. The
following abbreviations are used in the comment column to describe a sensor:
- A: Auto-rearm
- M: Manual rearm
- I: Rearm by init agent
 Default Hysteresis
The hysteresis setting applies to all thresholds of the sensor. This column provides the
count of hysteresis for the sensor, which can be 1 or 2 (positive or negative hysteresis).
 Criticality
Criticality is a classification of the severity and nature of the condition. It also controls the
behavior of the front panel status LED.
 Standby
Some sensors operate on standby power. These sensors may be accessed and/or
generate events when the main (system) power is off, but AC power is present.

Intel S2600IP Specifications

General

Brand	Intel
Model	S2600IP
Category	Motherboard
Language	English