EasyManuals Logo
Home>Intel>Server Board>SCB2 - Server Board Motherboard

Intel SCB2 - Server Board Motherboard User Manual

Intel SCB2 - Server Board Motherboard
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
41
4 Configuration Software and Utilities
Service Partition (Optional)
When you are setting up your server system, you can install a service partition onto your hard drive.
The service partition includes utilities, and other software that be run locally or remotely to assist in
system management. The service partition uses approximately 30 to 40 MB of hard disk space.
NOTE
It is highly recommended that you install the service partition before
installing an operating system. For more information, see the Service
Partition section in the Installation Guide for the Intel Server Control. This
document is included on the Resource CD-ROM shipped with your SCB2
server board.
Configuration Utilities
System Software Update Sequence
When you update the system software, you should do it in the following order.
1. Update BIOS
2. Update firmware (BMC & HSC)
3. Update FRU/SDR
4. Unplug system for 30 seconds
5. Clear CMOS via front panel

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel SCB2 - Server Board Motherboard and is the answer not in the manual?

Intel SCB2 - Server Board Motherboard Specifications

General IconGeneral
BrandIntel
ModelSCB2 - Server Board Motherboard
CategoryServer Board
LanguageEnglish

Related product manuals