Intel SCB2 - Server Board Motherboard User Manual

Configuration Software and Utilities 49
Advanced Chipset Control Submenu
Feature Option Description
Wake on Ring Disabled
Enabled
Legacy wake only: Determines the action of the system when
the system power is off and the modem is ringing.
Wake on LAN Disabled
Enabled
Legacy wake only: Determines the action of the system when
a LAN wake up event occurs.
Wake on PME Disabled
Enabled
Legacy wake only: Determines the action of the system when
a PCI Power Management Enable wake up event occurs.
Wake on RTC Alarm Disabled
Enabled
Legacy wake only: Determines the action of the system when
a RTC Alarm Wake up event occurs.
Security Menu
Enabling the Supervisor Password field requires a password for entering BIOS Setup. The
passwords are not case sensitive.
Feature Choices Description
User Password is Installed
Not Installed
Informational Only.
Administrator
Password is
Installed
Not Installed
Informational Only.
Set
Administrative
Password
Press <Enter> When the <Enter> key is pressed, a password prompt appears. Press
ESC key to abort. Once set, this can be disabled by setting it to a null
string or by clearing password jumper on server board.
Set User
Password
Press <Enter> When the <Enter> key is pressed, a password prompt appears. Press
ESC key to abort. Once set, this can be disabled by setting it to a null
string or by clearing password jumper on server board.
User Access
Level
Limited
No Access
View Only
Full
Sets the User access level for various BIOS setup functions.
Password on
Boot
Disabled
Enabled
If your password is set and enabled, the system prompts you for a
password before it boots.
Secure Mode
Timer
1 minute
2 minutes
5 minutes
10 minutes
20 minutes
60 minutes
120 minutes
Period of PS/2 keyboard and/or mouse inactivity specified for secure
mode to activate. A password is required for secure mode to function.
This option only appears on the screen after a “user” password has
been entered.
Secure Mode Hot
Key
(CTRL-ALT- )
Z
L
Key assigned to invoke secure mode features cannot be enabled
unless at least one password is set.
This option only appears on the screen after a “user” password has
been entered.
Secure Mode
Boot
Disabled
Enabled
System boots in secure mode. The user must enter a password to
unlock the system.
This option only appears on the screen after a “user” password has
been entered.
continued

Intel SCB2 - Server Board Motherboard Specifications

General

Brand	Intel
Model	SCB2 - Server Board Motherboard
Category	Server Board
Language	English