Intel SCB2 - Server Board Motherboard User Manual

50 Intel Server Board SCB2 Product Guide
Security Menu (continued)
Feature Choices Description
Video Blanking Disabled
Enabled
Blank video when secure mode is activated. A pass word is required
to unlock the system.
This option only appears on the screen after a “user” password has
been entered.
Power Switch
Inhibit
Disabled
Enabled
When enabled, the power switch is inoperable.
This option only appears on the screen after a “user” password has
been entered.
Server Menu
Feature Choices Description
System Management Press <Enter> Enters Submenu.
Console Redirection Press <Enter> Enters Submenu.
Event Log Configuration Press <Enter> Enters Submenu
Service Boot Enable
Disable
If enabled, server boots directly to System
Management.
Assert NMI on PERR Disabled
Enabled
If enabled, PCI bus parity error (PERR) routes to NMI.
Assert NMI on SERR Disabled
Enabled
If enabled, PCI bus system error (SERR) routes to NMI.
FRB-2 Policy Disable BSP
Do not Disable BSP
Retry 3 Times
Controls the policy of the FRB-2 timeout. This option
determines when the Boot Strap Processor (BSP)
should be disabled if an FRB-2 error occurs.
BMC IRQ Disabled
IRQ 5
IRQ 11
Sets the BMC IRQ.
After Power Failure Stays Off
Last State
Power On
Determines the mode of operation if a power loss
occurs.
Temperature Sensor Disabled
Enabled
If enabled, the system will not boot if the ambient
system temperature is outside the range specified in the
Sensor Data Record (SDR).
POST Error Pause Disabled
Enabled
If enabled, the system will wait for user intervention on
critical POST errors.
Platform Event Filtering Disabled
Enabled
Enable/Disable triggers for system sensor events inside
the Baseboard Management Controller (BMC).

Intel SCB2 - Server Board Motherboard Specifications

General

Brand	Intel
Model	SCB2 - Server Board Motherboard
Category	Server Board
Language	English