xGen Lite Installation and Programming Guide 121
Example
For example, you could create a 24/7 schedule and then have this schedule
follow an action. Next assign a keypad permission this schedule. Now based on
what the action does, we can conditionally enable or disable a keypad. This
provides a high level of flexibility and multiple sets of rules using actions can be
set up like this.
Programming Instructions for Arm-Disarm
Goal
Automatically Arm and Disarm your xGenLite system.
Pre-conditions
Areas have been programmed.
Notes
The Arm-Disarm will function as if it is the user you select. You will need to
program valid user permissions including Area Groups, User Schedule, Profile
levels, and active date and time.
Creating a new user only for the purpose of Arm-Disarm will make it easier to
maintain.
Use defaults for Schedules, Area Groups and Permissions for faster
programming.
xGenLite will sound a warning prior to the Arm-Disarm from arming an Area. This
is set in Areas > Area Timers > Area Type Delay.
If a user with Area Type Override option disarms an Area with Arm-Disarm, then
the Arm-Disarm will no longer function on that Area. To re-enable Arm-Disam
that Area must be manually armed.
Programming Sequence